Re: False APC UPS reboot messages
I would check out the uptime counter for a rollover. APC 'False' Reboot Alerts -ZackMLoop1 Systems: SolarWinds Training and Professional ServicesLinkedIN: Loop1 SystemsFacebook: Loop1 SystemsTwitter:...
View ArticleRe: File Monitor in NPM
This function is not available in NPM. I would instead recommend looking at Server & Application Monitor, which fully integrates with NPM.
View ArticleRe: Can you load Dell OMSA hardware sensors on linux in Orion?
Yes. SAM supports monitoring the hardware health of Dell PowerEdge, HP Proliant, and IBM X-Series server running either Windows or Linux. If you installed OMSA under Linux and the node is managed via...
View ArticleRe: What We Are Working On
Cisco is dropping java from their GUI interfaces . All new code is html5 based or core when will sw step and move to current best practices ?
View ArticleRe: What We Are Working On
Posted this 9months ago no repose from sw yet anyone watching this channel?
View ArticleClik here to view.
Re: File Monitor in NPM
Hi There,I think the tricky bit will be setting something up to look within the file. Just to throw another option out there we have a system called LANGuardian which uses network traffic as a data...
View ArticleRe: NPM Group alert
rob.hock wrote: If you want to use groups, you could configure a group member alert to alert on group member status going down.Haven't been able to figure this out, and looks like I am not alone. There...
View ArticleRe: track nodes by group name?
mrd0000 wrote: This thread has some good comments for a similar question:Re: NPM Group alert The suggestion there is either to use Custom properties (as said above), or to configure a Group Member...
View ArticleRe: track nodes by group name?
Recommendation is to use the Custom Property Manager to create a Custom Property at the Node level and assign values to that Custom Property in order to group the nodes by Custom Property value instead...
View ArticleClik here to view.
Re: SW npm 10.6 upgrade to 10.7 ??
The Database has been backup up and the installer is still hanging on the "Backup Database Type "YES"" section. By the way, name is Eric.
View ArticleRe: Resources Report
Didn't think of that. Will make do with the report you attached earlier. Thanks!
View ArticleEngineers tools set Can not download config
Hello, I have tried to use Cisco config viewer to view configuration in M series Cisco router but the following error displayed :" cannot download config from ( IP address for the router ) transfer...
View Articleupgrade to 7.3 - are we losing a poller?
I've been reading through the admin guide and release notes for upgrading our NCM 'seperate server' instance to 7.3 and it seems to me that we're effectively losing a poller. Our Orion Core server is...
View ArticleClik here to view.
Re: Unattended restoration of NPM
Is there an existing post/article on the mentioned unattended restoration of product's databases/settings? Thanks you in advance.
View ArticleRe: Port count report
Is there anyway to get the total number available if they are not monitored in NPM? a device poller to node?
View ArticleUsing UnDPs "vmGuestOS" & "vmGuestState"
I'd like to know when you would assign these UnDPs for "vmGuestOS" & "vmGuestState"? I take it from the descriptions below that you would assign the 'vmGuestOS' to the node that's the VM and not...
View ArticleRe: Can solarwinds monitor with scsi or nfs?
What in particular are you wanting to monitor with respect to SCSI or NFS?
View ArticleRe: AlertCentral: Server IP Change Needed
You have the option to set it as static or DHCP in appliance manager. If you choose DHCP, when you power it up in the new environment you can check the IP with vSphere client. It will show you the IP...
View ArticleRe: High Response time alerting in SW which does not show running ping -t
Perhaps there is an IPS involved? Symantec Endpoint Protection on the server could also cause odd behavior.
View Article