Re: Device discovery and polling IP address
Ok...after spending a few hours this morning looking at it I have found that when I test credentials from the manage credentials engineers toolset I don't see any traffic leaving from the server in my...
View ArticleRe: How to monitor desktop, laptops and other non-essentials without showing...
What comes to my mind is to set up on these devices shutdown/sleep action to run the script (using Orion SDK) against Orion server which will make them unmanaged on shutdown/sleep and a startup/wake...
View ArticleRe: Device discovery and polling IP address
You should really open a support case for this, but here are a couple more things to check. Are you using the hostname or IP for discovering the new node?Do you have IPv6 enabled on your Orion server?...
View ArticleClik here to view.
Re: Orion NPM Architecture, Speed, and SQL
Its a physical box dedicated to just solarwinds (I hijacked a old exchange mailbox server ) I did remove the thwack web parts. The part that gets me is sometimes its really fast. Just the other day we...
View ArticleClik here to view.
What did I miss?
Thursday just before the end of the week, after a team meeting I received the call. We all know it, it starts with "what the #$#@ is going on with the network!? (for some reason it always gets blamed...
View ArticleRe: NCM is seeing date change as a change Cisco Nexus 5548
NCM provides a filter which includes some canned strings the filter out time changes when the confiig change report runs. However the NXOS time string is different then what is provided with NCM. If...
View ArticleRe: How to monitor desktop, laptops and other non-essentials without showing...
Does this require elevated level creds though? I would hate to have SDK available from each system to for say remove or add nodes...
View ArticleRe: TrippLite UPS SNMP MIB
I realize this is an old post. We have several TrippLite UPSs and are using these pollers. (Thanks grantsewell !) I've also found and added the following poller but it doesn't seem to be supported...
View ArticleClik here to view.
Re: Cisco UCS server blades not showing Hardware Health of Servers option in...
Hardware Health of Cisco UCS Blade Chassis is a function of NPM, not SAM. To enable UCS monitoring check "UCS manager credentials" under "Additional Monitoring Options" when adding the node as pictured...
View ArticleRe: Cisco UCS server blades not showing Hardware Health of Servers option in...
i was unsure of SAM/NPM but have both here- I have added the fabric interconnects using the ucs manager creds and that's working great.except that upon adding the blades for monitoring I am not seeing...
View ArticleRe: SolarWinds NCM v7.2 is Now Available!
So has anyone had any issues with installing 7.2? We have NPM and NCM on the one server, and I am looking at upgrading to 10.5 for NPM and 7.2 NCM. With the initial issues seen with 10.5 NPM I am...
View ArticleRe: querying past alerts
Chris, historical data is stored in alert_recs table, alert details (i.e. name, owner, etc.) are in workspace_file table. The command may look like this: select date_trunc('day', a.time_stamp),...
View ArticleAny way to create a report that will pull me up a list of interfaces that are...
We have a case where we are experiencing asymmetric routing over some of our routers, there is some receive traffic coming down our DSL back up lines. We have a very large estate and I need to weed out...
View ArticleClik here to view.
Re: NCM is seeing date change as a change Cisco Nexus 5548
Hi mmedwid, All you need to do is tell NCM to ignore the lines beginning with !Time, adding the details below to your comparison criteria should sort it: Regards,John
View ArticleClik here to view.
Report hosts intermittently
I'm trying to do a report just like this (in Report writer)(Hosts com intermitência-Ultimas 12 horas) right This report has:NameEvent time - Event type - and a message about the event (packs lost, if...
View ArticleDo you prefer agentless or agent-based monitoring? Are there situations where...
When I’m evaluating a monitoring system, one of the first things I check for is if it is agent-based or agentless. The use of one method over another doesn’t necessarily spell disaster for the project...
View ArticleRe: Any way to create a report that will pull me up a list of interfaces that...
HAve you tried an interface report with received traffic today (assuming daily vs real-time will better find your culprits) and include in the filter section the same line but in a complex statement of...
View ArticleRe: Do you prefer agentless or agent-based monitoring? Are there situations...
we have been slowly moving off Symantec/Altiris client/server mgmt which is a good agent based solution but whose usability for GUI or reporting customization I found seriously lacking.in evaluating...
View ArticleRe: SolarWinds NCM v7.2 is Now Available!
Rather stay a bit behind the bleeding edge so to speak, after hearing what initially happened with 10.5
View ArticleRe: Device discovery and polling IP address
justa2e2 wrote: Ok...after spending a few hours this morning looking at it I have found that when I test credentials from the manage credentials engineers toolset I don't see any traffic leaving from...
View Article