Clik here to view.
Re: NPM 10.7 Beta 1 Available
Is it just me or is the interface mode (access/trunk) missing the mark on quite a few?Layer 2 interfaces with L2 channel-groups not showing as mode access Some layer 2 trunks (switchport mode trunk)...
View ArticleRe: SAM integration with CA Asset Manager
a one time export and import is certainly possible, and relatively straight forward. A continuous updating of CA's It Asset Manager however would require a bit of automation, either using the Orion...
View ArticleRe: Unable to monitor multiple volumes with the same name from an IBM i.
It's going to be difficult to diagnose without a MIB walk from the device. Please open a case with support so we can determine why there are multiple RAM volumes appearing in List Resources. As an...
View ArticleRe: NPM: Audit Trail - missing
We've created a ticket already. But I was just trying my luck that someone has an easier solution. The one given me by the support team is something that will tinker our database, which I'm not that...
View ArticleBlackberry email delivery
Hello Friends, I have a question About SAM module used to test BB end user experience. We tested BB email delivery feature using SAM module but i have some doubts:-1) Is physical BB device a must to...
View ArticleBlackberry Email delivery
Hello Friends, I have a question About SAM module used to test BB end user experience. We tested BB email delivery feature using SAM module but i have some doubts:-1) Is physical BB device a must to...
View ArticleRe: When will your SCP badge be added to your profile?
WooHoo! I just passed (literally a few minutes ago) the SCP exam! Excited to show off my solarwinds skillz. I know badges and kits take time and appreciate all the effort of patrick.hubbard and the...
View ArticleClik here to view.
Re: Cisco UCS | Advice on configuring alerts
You need to limit the highlighted area. (or just remove it entirely as the UCSStatus will only apply to UCS devices, which is what I assume you want)
View ArticleClik here to view.
npm show rtr outgoing discard, the rtr show none, why??
on the closed network, NPM is showing 1000's of transmit discard on my wan link, none receive discards on the same linkon the end side, i do not see any error on my rtr that NPM shows errors , i...
View ArticleClik here to view.
Re: Orion SDK Information
We're working on finishing up the 1.8 SDK update, but I don't have a date for you. In general the tools in the SDK 1.7 should connect to NPM 10.6 just fine.
View ArticleRoute Flapping on Front Page of NPM
Has anyone created a module for the number of times a route has flapped and the device is flapped on? Trying to find the best way to put this on our Orion frontpage (in 10.6) and can't seem to find a...
View ArticleClik here to view.
Re: Using Powershell to add nodes with Custom Properties for Device Type
Jan,Question on SDK provided CRUD.AddNode.ps1 How do you specify the ICMP Only poller?When I look at Custom Properties, the poller doesn't show ICMP only, but as "Most...
View ArticleNetflow data not showing up in solarwinds
We just brought the solarwinds and I am very new to thisproduct. I am setting up the Netflowfrom the cisco switch to Solarwinds Netflow module. I am see netflow information on my switch but NOT...
View ArticleRe: Cannot upgrade Syslog from Free to Trial Mode
Because I wouldn't have been able to unlock the free version anyway. I cannot just re-install the OS on my management machine, and do not want to dedicate a machine just to capture/view syslogs from a...
View ArticleRe: Re: The server at "{0}" does not appear to be an Orion server.
See attached. I rebooted the VM appliance
View ArticleRe: Re: The server at "{0}" does not appear to be an Orion server.
I found the issue. The account used to connect to Orion cant be a Windows AD account it has to be a local Orion administrator account. I was able to use the default admin account to connect to it....
View ArticleRe: Netflow data not showing up in solarwinds
Please post the NetFlow config from your switch.
View ArticleProduct Alert updates not working correctly
Is any one taking a look at the product alert updates that pop up at the top of the page? I keep getting alerts at no set pattern for things that I have already upgraded. This has been going on for...
View ArticleRe: Would You Automate QoS Policy Based On Real-Time Flow Data?
As I've mentioned in other posts I'm one of those paranoid people that doesn't like systems making automatic changes to my configs.However, the scenario postulated is valid and I've seen a similar...
View Article